Marine Equipments Pvt Ltd

Home
About
Market
Downloads
Products
Suppliers
Contact

Products / Bilge Pump / Rule LoPro Bilge Pump

Rule LoPro Bilge Pump

A product of Xylem

Product Code :

Update Order

Order

Update Order

Order

BILGE PUMP LP 900GPH 12V Rule	LP900D
BILGE PUMP LP AUTO 900GPH 12V Rule	LP900S

Copyright © Marine Equipments Pvt Ltd 2024

Rule LoPro Bilge Pump

Connections: For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose.
Dimensions: 193mm long, 59mm diameter / 237mm long, 59mm diameter.
Current Draw: 4(amps)
Fuse Size: 7.5(amp)
Output: Up to 56 litres/minute (12.5 gallons/minute). Max. recommended discharge head 3m
Brings Rule pumping power to tight spaces.
Fully rotating discharge body for installation flexibility.
Choice of discharge ports supplied with each pump.
Ignition protected.
Horizontal or Vertical Mounting
For automatic operation use Rule Float Switches.
3 Operation Modes for LP900S:
High water mode; The pump starts when the water level reaches 50mm (2")
Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3")
Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.